Taco Fiesta four panel popup

this card ideas is from Dawn's stamping thoughts- love the pop up and I had to case it.

the base card is 4 1/2 x 11 cardstock scored in half fold to the left.

use strips of 

celebrate eveything DSP 

Basic borders die to make the zigzag border with pacific point 

cardstock strips of crushed curry, granny apple green, pumpkin pie

to color in - need same colors and a red for all the different panels you want to color in. Stamp the pinata on a scrap piece of white and border with pumpkin pie 

stamp the sentiment on a 1/2 inch strip of white and add with dimensionals.

mechanism is a strip 11 inches wide by 2 inches scored at 2 1/4, 5 1/2, and 8 1/4. fold it into a W and glue down the far left and far right panel onto the base card as shown. Glue one side down with the panels folded and then glue the other side down and close the card to make sure it fits. 

you will need four- 2 1/4 inch square solid color cardstock for the accent squares for each of the 4 panels 

 you need four 2 inch square white pieces for the inside of the accent squares as shown below

stamp 4 different images onto each of the 4 2 inch squares and color in.

I cut  the chips and placed them around the guacamole and cut the bottom of the chip in a round pattern so it looks like it is stuck in the guacamole.

this is another case but I put it on the backgraound of the sweet citrus embossing folder to simulate the limes and I love it - just a little extra card I made with the set this month playing around

enjoy!